BEE PLUMBING

Common Reasons You Need to Fix Your Water Heater

Water heating systems are one of those familiar features that most people cannot imagine starting their day without. A warm shower in the morning is a dream come true; a glass of cold water on a hot summer’s day is a lifesaver; and a load of sparkling clean clothes is the epitome of convenience. Yet, what do you do when your water heater exhibits some issues?

A water heater is one of the most underrated aspects of a home until it fails to work or it has entirely stopped providing service to the homeowner. However, when people ignore warning signs of the failing instant water heater, they end up paying through their nose for repairs, squandering energy, and worst of all, when storage water heaters have a blow, they end up damaging their houses and endangering the lives of their families. One thing you can do to avoid this is to learn about common water heater issues so you can check your storage heaters or instant heaters before the problem worsens.

Some Common Reasons Why You May Need Water Heater Repair

A functional water heater is important for a comfortable and efficient home. Nevertheless, like all things electrical, it can develop problems over time. Here are some common reasons that you need to call a plumbing repair in Singapore to fix your water heater.

1. Absence of Hot Water

Hot water will not be produced by a faulty one. There are several potential causes such as an ineffective thermostat, sediment buildup at the bottom of the tank or a burned out heating element. Prompt correction ensures that cold baths are avoided. A plumber Singapore can help determine if it can still be repaired or if you already need a water heater replacement.

2. Varying Water Temperature

If your water heater gives inconsistent temperature fluctuation between hot and cold, then this could signify issues with the thermostat, malfunctioning heating elements, or sediment effect on the efficiency of the heaters. Consistent water temperature can be maintained through regular maintenance and prompt repairs.

3. Unusual Sounds

You would be disturbed if you hear strange sounds like thudding, popping or rumbling from your water heater. Minerals from hard water accumulating at the base of the tank can lead to overheating and noise in a water heater. This is typically the cause of these problems. This problem can sometimes be resolved by flushing out the water heater tank, though in other cases, one might require contacting professional repair services.

4. Leaking Water Heater

It is an emergency when a hot water system starts leaking in any way, shape, or form; it needs immediate attention from professionals who know what they are doing because even slight leakage can bring severe damage if left unattended for a long period.

5. Discoloured Water

If rusty or discoloured hot water comes from your taps, this often means there is corrosion inside your hot water tank caused by a lack of anode rod, which is supposed to protect the tank from corroding. Changing the anode rod helps prevent further damage and maintains the quality of your hot water.

6. Less Water Pressure

Lower pressure in your hot water taps can signal sediment build-up in the tank or pipes. This accumulation restricts water flow and decreases the efficiency of your heater. Flushing out the tank and cleaning up pipes may correct this problem, thus allowing for normal pressure.

7. Foul-Smelling Water

Your hot water may have a bad odour due to bacteria growing inside its container, which is common when you use well water for domestic purposes only; thus, you will need to clean it up by flushing it with hydrogen peroxide solution.

8. An Outdated Hot Water Heater

The service life of a heater is approximately 8-12 years. Once that time has elapsed, more frequent breakdowns in its operation may occur. Due to cost considerations, replacing rather than continually repairing it would be more efficient. Make sure to also pick good water heater brands to avoid early damage.

It is always advisable to engage the water heater in regular servicing and repairs as and when needed to get additional years and efficiency. Any of the above problems, if experienced, warrant that they should be corrected as early as possible to prevent the deterioration of the situation. This is why one should look for qualified personnel to offer excellent services in water heater repair. Thanks to their expertise and customer orientation, you will be sure to always have your water heater at its optimum state.

Preventative Measures to Avoid Water Heater Problems

But there is something that you can do to prevent these problems. Here are some things that you can do to keep your hot water heating system working well for longer:

Regular Flushing: At least once per annum, flushing helps remove sediment build-up from the bottom of the tank. Sediments can lower the effectiveness of heaters, leading to inconsistent hotness and strange sounds, among other issues. This makes for good performance since it prevents these issues from happening while increasing efficiency.
Inspecting the Anode Rod: You need an anode rod in your water heater as it prevents corrosion within its tank. Therefore, checking this rod every two or three years may increase the duration for which the geyser serves you. Once heavily corroded, then replacement is required.
Testing the Pressure Relief Valve: The pressure relief valve is an important safety logic that stops over-pressurisation on a heater; hence, one should test this valve after one year—just like they would keep doing everything else. Water should burst through the drainpipe to test the lift lever on the valve and allow it to snap back. This could indicate that your valve needs replacement if this does not happen.
Adjusting the Thermostat: Set your thermostat no higher than 120 degrees Fahrenheit so that it doesn’t overheat and scald anyone. Even more, this temperature will reduce power usage; hence, you will pay less for energy while still having sufficient heated water in supply.
Insulating the Tank: This will assist with efficiency and reduce energy costs when insulation is installed on the first few feet of cold/hot-water pipes and the heater tank itself. For example—insulation helps hold warmness within the tank for a longer period so that your water heater doesn’t work harder than needed.
Scheduling Professional Inspections: It is always good to have an annual inspection by a qualified plumber as they can spot possible future issues before they become major problems. When certified professionals check that all components are working fine, minor repairs are to be made where necessary to keep your system functioning properly.

Contact Bee Plumbing for Water Heater Installation and Repair Service in Singapore

Regularly maintaining and promptly repairing your water heater ensures you always have hot water when needed at home. By understanding common problems and taking precautions, you can prolong its life span and avoid costly repairs to it in time. When one requires professional assistance, Bee Plumbing Singapore offers expert maintenance and repair services from trusted service providers to keep it in optimal condition.

For more information about maintaining, repairing, or replacing the water heating system, contact Bee Plumbing regarding your concern. Properly functioning your home’s heating system will give you comfort and peace of mind.